The upgraded Darkglass Vintage Ultra v2 features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation.
Master
Whereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.
Blend
Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Level
Sets the volume of the overdriven signal.
Drive
Sets the amount of saturation in the overdriven signal.
Attack Switch
Sets the amount of treble content to saturate: The “Boost” setting emphasizes the treble content extra clarity and presence. The “Flat” position leaves this register untouched while the “Cut” position will reduce the amount of high frequencies being saturated.
Grunt Switch
Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.
Bass
+-12dB @ 100Hz
Lo Mids
+-12dB switchable 250Hz, 500Hz and 1kHz
Hi Mids
+-12dB switchable 750Hz, 1.5KHz and 3kHz
Treble
+-12dB @ 5kHz
Direct Output
A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles.
Ground lift
Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.
Cab Sim
Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.
Headphones
Vintage Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.
USB
A Micro USB B connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.
- Current draw: 110mA
- Power requirement: 9V DC adapter with center-negative plug
- Dimensions: 4.21″ x 4.72″ (10.7 x 12 cm)
| Title | Default |
|---|
Fast Shipping and Professional Packaging
Thanks to our longstanding association with UPS FedEx DHL, and other major global carriers, we can offer a variety shipping options. Our warehouse personnel are well educated and will package the goods according to the exact and precise specifications. Your products will go through a thorough inspection and be securely secured prior to being shipped. We deliver to thousands of customers every day from all over the world. This shows that we're committed to becoming the biggest retailer on the internet. These warehouses are located in Europe just as they are in the USA.
Note that orders containing more than one item are processed according to the item.
Prior to shipment the items, our staff will carry out an exhaustive inspection of the products you ordered. Most orders are shipped within 48 hours. The expected delivery time is 3 to 7 days.
Returns
Stock is dynamic, and cannot be fully controlled by us because of the involvement of many entities, including the factory as well as our warehouse. Actual stock levels may fluctuate at any point. It is possible that you will not receive your order once it's been placed.
The policy is 30 days. If 30 days have passed since you purchased your product, we are unable to give you a refund or exchange.
Your item should be in its original packaging and not be used. The item must be in the original packaging.
Related products
Pedals
