Sale!

Mackie HR824mk2 Studio Monitor Mackie

Original price was: $ 800.Current price is: $ 240.

SKU: us_1995462246462 Category: Studio Monitors Tag: Recording Department

Description
shopping

FEATURES

High-resolution Active studio reference monitor
Ultra-linear frequency response for accurate mix translation
8.75″ high-precision, low-distortion LF transducer
1″ titanium dome, ferrofluid cooled tweeter
Optimized Waveguide for wide, even sweet zone
Twin FR Series amps – 150W for LF / 100W for HF
Cast aluminum Zero Edge Baffle minimizes diffraction
Full internal damping eliminates midrange artifacts
Passive radiator provides tight, articulate bass extension down to 35Hz
Acoustic Space, LF roll-off, and HF controls
Balanced XLR, TRS, and unbalanced RCA inputs
OmniMount ready for easy wall/ceiling placement
THX pm3 certified for surround sound applications
Perfect for High-Definition audio, cinema and gaming systems

Free-field Frequency Response: &plsumn;1.5dB, 37Hz to 20kHz
Lower cutoff frequency: -3dB @ 35Hz
Upper cutoff frequency: -3dB @ 22kHz
Sound Pressure Level at 1 meter, -7.5dBu into balanced input: 100dB SPL @ 1m
Maximum peak SPL per pair: 120dB SPL @ 1m
Maximum short term SPL on axis, half space 80Hz to 2.5kHz: 111dB SPL @ 1m
Residual noise (maximum gain, 600? source, 20Hz-20kHz bandwidth): < 8dB SPL @ 1m

Rated Line Input Voltage and Power:

(Power consumption):
Standby mode: 8 watts
Quiescent (idle): 18 watts
Musical Program, Loud mix: 135 watts
US: 120 VAC, 60Hz
Rated Power (For UL-6500, CSA-E65-94, EN-60065): 150 watts

Amplifier Section

(Low-frequency power amplifier)
Rated Power (at 1kHz with 1% THD): 150W
Rated Load Impedance: 4 ohms
Burst Power Output: 350W
Rated THD (1W to -1dB of rated power): 0.1 %
Slew Rate: 35V/S
Distortion (THD, SMPTE IMD, DIM 100): <0.035%

Signal-to-Noise

(20Hz-20kHz, unweighted, referenced to 150W into 4?):
> 102dB
Cooling: Convection
Design: Class AB, Parametric Servo Feedback
(High-frequency power amplifier)
Rated Power(at 1kHz with 1% THD): 100W
Rated Load Impedance: 6 ohms
Rated THD (1W to -1dB of rated power): 0.1 %
Burst Power Output: 210W
Slew Rate: 35V/S
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise (20Hz-20kHz, unweighted, referenced to 40W into 8?): > 102dB
Cooling: Convection
Design: Monolithic IC, Conventional Class AB

System Specifications

Input Type: Balanced Differential (XLR and 1/4″ TRS), Unbalanced (RCA)
Input Impedance: 20k? Balanced, 10k? Unbalanced
Input Protection: Rfi and Level Protected
Maximum Input Level: +20dBu
Low Frequency filter: -3dB @ 37Hz, 2nd-order transitional high-pass filter, -3dB @ 47Hz, 4th-order Chebyshev high-pass filter, -3dB @ 80Hz, 4th-order Butterworth high-pass filter
HF Equalization: ±2dB @ 10kHz, shelving
Acoustic Space: (A position) -4dB @ 50Hz, shelving, (B position) -2dB @ 50Hz, shelving, (C position) flat
(Compressor)
Independent high and low-frequency overload detection
Enclosure Alignment: 6th Order
Over Excursion Prevention: 2nd Order High-Pass filter
Low Line Voltage Shut Down: 60% of Nominal Line
Thermal Protection: Amplifier Shut-Down, Auto Reset
Muting: 5 seconds at turn-on
Driver Protection: Independent LF and HF Detection, Overall Compression

Transducers

Low-frequency driver:
Diameter: 8.75 inches (170mm)
Sensitivity (2.83V, 1m): 91dB SPL
Nominal Impedance: 4?
Voice Coil Diameter: 1.6″ (40mm)
Frame: Die-cast magnesium
Magnet: Ferrite
Fully shielded: Ferrite opposing magnet
High-frequency driver: Sensitivity (2.83V, 1m): 91dB SPL
Nominal Impedance: 6?
Power Handling (Long Term/Program): 20/50 watts
Frequency Range: 1.6kHz to 22kHz
Diaphragm/Suspension: Titanium with polymer suspension
Voice Coil Diameter: 1.0″ (25.4mm)
Magnet: Neodymium
Bucking Magnet: Ferrite opposing magnet
Passive Radiator: 6″ x 9″ (152mm x 228mm) mass-loaded elliptical flat
piston with variable thickness filleted-edge rubber surround
Crossover Type: Modified Linkwitz-Riley, 24dB/octave @ 1900Hz

Fast Shipping and Professional Packaging

We provide a variety of shipping options thanks to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff are highly trained and will package your items in accordance with our exact and exact specifications. Before shipment, all items will be thoroughly examined and securely secured. Every day, we deliver to thousands of clients in many countries. The fact that we are committed to becoming the biggest online retailer in the World is clear. There are distribution centers and warehouses across Europe and the USA.

Note: Orders that contain multiple items will have a distinct processing period for each item.

Prior to shipment, we examine the items ordered carefully before shipping. The majority of orders will be delivered within 48 hours. The time to deliver varies from 3-7 days.

Returns

Stock is dynamic. It's not completely managed by us since we are involved with multiple parties such as the factory and our storage. The levels of stock can change at any moment. Please understand it may happen that your order may be out of stock after the order has been placed.

The policy is 30 days. If you don't receive the product within the 30 days period, we're unable to offer the option of a refund or exchange.

Your item must be in the original packaging and in good condition. It must also not be used. It must also be returned in the original packaging.

Mackie HR824mk2 Studio Monitor Mackie

FEATURES

Related products

Login